Welcome to the Frequently Asked Questions about AudioConsole.

• How can I change the language in AudioConsole?
• How do I start a new test?
• How can I disable frequencies I do not use?
• How do I use an Oscilla® SM audiometer or TSM tympanometer with AudioConsole?
• How do I enable the comport?
• How do I enter a license key in AudioConsole?
• How do we share the AudioConsole database in a multi-user environment?

• My question is not here!

1. Make sure you have selected a patient (if not, go to the Patient Database and select a patient).
2. Click the button "Start test".
3. If you want to conduct an automatic test, click the button "Auto test".

1	2	3

1. Go to the Settings window.
2. Click and select a language from the drop-down list.
3. Click OK.

1. When AudioConsole is open click the "Audio Setup" button.
2. Click the checkboxes to enable/disable frequencies as depicted below.
3. Click OK.

1. Go to the Settings window.
2. On the General tab page, click the checkbox to enable COM port A and/or B.
3. Click OK.

1. Go to the Settings window.
2. On the General tab page enter the license as depicted below.
3. Click Activate.

1. Make sure you have a COM port in the computer.
2. Enable COM port: Follow the How do I enable the comport? question.
3. Enter license key: Follow the How do I enter a license key in AudioConsole? question.
4. Turn on the audiometer/tympanometer.

1. Put the database on a network drive.
2. From each AudioConsole installation, go to the Settings window.
3. Change the database location to point to the database on the network drive.
4. Click OK.

Inmedico A/S